Loading

cloudsailor1 smart

  1. smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.19.37-vsh0zfs0713-nospec] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Intel 53x and Pro 2500 Series SSDs
  6. Device Model:     INTEL SSDSC2BW240A4
  7. Serial Number:    CVDA451203352403GN
  8. LU WWN Device Id: 5 5cd2e4 04bec0d1b
  9. Firmware Version: DC32
  10. User Capacity:    240,057,409,536 bytes [240 GB]
  11. Sector Size:      512 bytes logical/physical
  12. Rotation Rate:    Solid State Device
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   ACS-2 (minor revision not indicated)
  15. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is:    Thu May 23 16:37:08 2019 CEST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART Status not supported: ATA return descriptor not supported by controller firmware
  22. SMART overall-health self-assessment test result: PASSED
  23. Warning: This result is based on an Attribute check.
  24.  
  25. General SMART Values:
  26. Offline data collection status:  (0x05) Offline data collection activity
  27.                     was aborted by an interrupting command from host.
  28.                     Auto Offline Data Collection: Disabled.
  29. Self-test execution status:      (  33) The self-test routine was interrupted
  30.                     by the host with a hard or soft reset.
  31. Total time to complete Offline
  32. data collection:        ( 5860) seconds.
  33. Offline data collection
  34. capabilities:            (0x7f) SMART execute Offline immediate.
  35.                     Auto Offline data collection on/off support.
  36.                     Abort Offline collection upon new
  37.                     command.
  38.                     Offline surface scan supported.
  39.                     Self-test supported.
  40.                     Conveyance Self-test supported.
  41.                     Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                     power-saving mode.
  44.                     Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                     General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:    (   1) minutes.
  49. Extended self-test routine
  50. recommended polling time:    (  48) minutes.
  51. Conveyance self-test routine
  52. recommended polling time:    (   2) minutes.
  53. SCT capabilities:          (0x0025) SCT Status supported.
  54.                     SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  60.   9 Power_On_Hours_and_Msec 0x0032   100   100   000    Old_age   Always       -       11379h+47m+01.380s
  61.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       6
  62. 170 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
  63. 171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
  64. 172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
  65. 174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       1
  66. 183 SATA_Downshift_Count    0x0032   100   100   000    Old_age   Always       -       9
  67. 184 End-to-End_Error        0x0033   100   100   090    Pre-fail  Always       -       0
  68. 187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
  69. 190 Airflow_Temperature_Cel 0x0032   022   043   000    Old_age   Always       -       22 (Min/Max 18/43)
  70. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       1
  71. 199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
  72. 225 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       9075680
  73. 226 Workld_Media_Wear_Indic 0x0032   100   100   000    Old_age   Always       -       65535
  74. 227 Workld_Host_Reads_Perc  0x0032   100   100   000    Old_age   Always       -       52
  75. 228 Workload_Minutes        0x0032   100   100   000    Old_age   Always       -       65535
  76. 232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
  77. 233 Media_Wearout_Indicator 0x0032   046   046   000    Old_age   Always       -       0
  78. 241 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       9075680
  79. 242 Host_Reads_32MiB        0x0032   100   100   000    Old_age   Always       -       9908352
  80. 249 NAND_Writes_1GiB        0x0032   100   100   000    Old_age   Always       -       373890
  81.  
  82. SMART Error Log not supported
  83.  
  84. SMART Self-test log structure revision number 1
  85. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  86. # 1  Offline             Interrupted (host reset)      10%      9153         -
  87. # 2  Offline             Interrupted (host reset)      10%      9151         -
  88. # 3  Offline             Interrupted (host reset)      10%      2477         -
  89. # 4  Offline             Interrupted (host reset)      10%        29         -
  90. # 5  Offline             Interrupted (host reset)      10%        29         -
  91. # 6  Offline             Interrupted (host reset)      10%         0         -
  92. # 7  Offline             Interrupted (host reset)      10%         0         -
  93.  
  94. SMART Selective self-test log data structure revision number 0
  95. Note: revision number not 1 implies that no selective self-test has ever been run
  96.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  97.     1        0        0  Not_testing
  98.     2        0        0  Not_testing
  99.     3        0        0  Not_testing
  100.     4        0        0  Not_testing
  101.     5        0        0  Not_testing
  102. Selective self-test flags (0x0):
  103.   After scanning selected spans, do NOT read-scan remainder of disk.
  104. If Selective self-test is pending on power-up, resume after 0 minute delay.